CAD CAM EDM DRO - Yahoo Group Archive

Re: Oiler metering units...

Posted by Lee Studley
on 2002-09-18 13:41:44 UTC
Hi Dave,
http://www.tricodistributor.com/
go to the online catqalog-->table of contents-->
central lubrication...
There's an over all description on metering
and pumps too. On my seriesII the meters are
number "0" types (bearings,ballscrew,vertical
non-Zaxis ways( ie sides of ways)..) except on
ways that are load bearing, then they are
number "1"'s.

Enco has the best prices I've seem on the
one-shot manual pumps at $39 or $70 for
Enco generic or namebrand(bijor) These pumps
seem to be able to apply oil at about 50-100psi max.

-Lee

--- In CAD_CAM_EDM_DRO@y..., "turbulatordude" <davemucha@j...> wrote:
> Can you guys post a link for these things ?
>
> I am currently oiling each joint by hand and know there is a
better
> One-Shot way.
>
> Dave
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., "Lee Studley" <indigo_red@q...> wrote:
> > Tim,
> > I played with one last night and came to
> > the same conclusion. The new TRICO ones have
> > little filters built into the inlets. Maybe the
> > old ones did too and thats what is clogged up.
> > -Lee

Discussion Thread

Lee Studley 2002-09-17 16:16:09 UTC Oiler metering units... Tim Goldstein 2002-09-17 22:04:30 UTC RE: [CAD_CAM_EDM_DRO] Oiler metering units... Lee Studley 2002-09-18 11:02:11 UTC Re: Oiler metering units... turbulatordude 2002-09-18 13:15:30 UTC Re: Oiler metering units... Lee Studley 2002-09-18 13:41:44 UTC Re: Oiler metering units... turbulatordude 2002-09-18 17:45:53 UTC Re: Oiler metering units... galt1x 2002-09-18 20:26:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Oiler metering units...