Re: [CAD_CAM_EDM_DRO] cutting stainless steel sheet

Hi, first you need to give us some information, is it 316 lh, 304 etc, and
what process was the metal worked? cold rolled, hot forged,
annealed,passivated, pre-hard and then something about cut finnish. Armed
with the info many capable answers will come forth. cul Brian f.

----- Original Message -----
From: "cdoughtynz" <cdoughty@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, September 23, 2002 2:30 PM
Subject: [CAD_CAM_EDM_DRO] cutting stainless steel sheet


> Hi All,
> I need some advise on cutting stainless steel sheet, 2 to 3 mm thick
> on a CNC router table, using an adjustable speed spindle (0-24000rpm).
> Is it practicable, what cutter should I use? what speed and feed
> rates should I try?
> Colin
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>