Re: [CAD_CAM_EDM_DRO] Re: flange mount bearing

you need a taper roller bearing. finding a small pillowblock version for
mounting is tough, and no, mcmaster does not carry them (except in
plastic)

I recently purchased two that were about a 1" bore throught Dodge
Bearing.

Paul

turbulatordude wrote:

>
> McMaster Carr does not have it.
>
> My problem is that I need to put a bearing on a plate that is off by
> about 15 degrees in tow directions.
>
> to complicate matters, the belt adjustment is such that those angles
> change when the belt is adjusted.
>
> Maybe I just better look for a different method of mounting.
>
> Dave
>
> --- In CAD_CAM_EDM_DRO@y..., Marv Frankel <dcdziner@p...> wrote:
> > Dave,
> > Try www.mcmaster.com, and if they don't have it, it doesn't exist.
> >
> > Marv Frankel
> > Los Angeles
> >
> >
> > ----- Original Message -----
> > From: "turbulatordude" <davemucha@j...>
> > To: <CAD_CAM_EDM_DRO@y...>
> > Sent: Monday, September 23, 2002 2:04 PM
> > Subject: [CAD_CAM_EDM_DRO] flange mount bearing
> >
> >
> > > Hi group,
> > >
> > > I need a 1/4 or 3/8 flange mount self aligning bearing.
> > >
> > > the links to the sites you guys gve me a few weeks ago start at 1/2.
> > >
> > > Any ideas ?
> > >
> > > anybody make a gimbled bearing mount or something ?
> > >
> > > Dave
> > >
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > sister site to the CCED group, as many of the same members are there, for OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > >
> > > Post messages: CAD_CAM_EDM_DRO@y...
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> > >
> > >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/