RE: [CAD_CAM_EDM_DRO] Re: EMC setup questions > Success !

yes, look in the .ini file. There is an area for codes to be run at
startup. Just change the G20 to G21 and you should be in business.

John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia

> -----Original Message-----
> From: awallin25 [mailto:anders.wallin@...]
> Sent: Monday, October 14, 2002 8:04 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: EMC setup questions > Success !
>
>
> > inches. Also following error is in percent deviation per unit so it
> > becomes very small when you switch to mm. I'd multiply it by >
> 25 at least
> > so that you get back to where it would be with inches.
>
> Yes! This solved my problem, I increased min_ferror from 0.01 to
> 0.25, and now everything works fine.
>
> The interpreter still wakes up in mode G20, and I have to either
> do G21 manually or have a G21 in the beginning of a program for
> things to work right. Does anyone know if there is a way to make
> EMC default to G21 when it starts up?
>
> Now I will have to generate some G-code for testing... Are there
> any standard tests that the group could recommend for testing
> accuracy, suitable speed/feedrates etc ?
>
> Also, I now have the axes set up like a right handed coordinate
> system with +Z pointing down. I have noticed in some posts that
> others have +Z pointing up.... what is more common ??
>
> AW
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> as a sister site to the CCED group, as many of the same members
> are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>