CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Stepper for Homier and other questions

on 2002-10-15 12:33:51 UTC
Andrew, Thanks for the reply

So, you say that Turbocnc (and some of the others) only interprets g-code, so I would either need to be able to create a g-code list of the instructions that define the shape that I'm trying to create, or find a program that outputs g-code that Turbocnc can then input, or find a CADCAM program that can go from the drawing to the g-code to the parallel port ? Do I have that right ?

What kinds of programs, other than the integrated CADCAM generat g-code ? Is there a way to generate g-code from Autocad files and is that a good way to go, or not. I have some experience in Autocad, so I would like to be able to take advantage of that, but if is going to cause more problems than it saves, I would look at another solution.


Terry
Northwest PA

>>> drewid@... 10/14/02 12:51PM >>>
Message: 18
Date: Mon, 14 Oct 2002 15:11:03 -0400
From: "Terry D Palmer" <tdp_130@...>
Subject: Stepper for Homier and other questions

I have recently joined this group, and have been following the discussions
and have a couple of questions that I'm sure this group can answer.

I'm thinking of trying to automate a Homier mini-mill. I am wondering what
is the "standard" stepper used to automate this mill and what might be a
good source for those motors ? I've seen the dicussion on feed rates, etc,
but assume that there are probably several Homiers already automated.

Also, what is typically done for the Z axis feed ? I have seen some mods
with an acme screw.

Is it necessary or wise to go to ball feeds on the X and Y axis (and Z) ?

[It may not be absolutely necessary, but it will save a lot of problems.]

I think my approach is to assemble the modules rather than buy a
pre-packaged kit. I have been looking at the Gecko drives. I am just
starting to look at ths software, Turbocnc, Dolphin, Vector, etc, etc. One
feature that I think would be nice is to be able to work from AutoCad
drawings. Certainly the price for Turbocnc ( $20 ?) would make it easy to
get started.

[There's TurboCNC ($20 controller shareware) and TurboCADCAM (an entirely
unrelated drawing and 2.5d G-code package which I sell for $450). I mention
it because the rest of the items on your list are CAD or CADCAM programs.
Other control programs, beside TurboCNC, are CNC Pro, Master5, DeskWin and
EMC. These just tell the computer how to execute G-code programs, but don't
let you produce drawings or models (like a CAD program) or G-code (like a
CAM program).]

I'm not sure if I have the whole picture. One of the above software
packages runs on the PC that outputs (parallel port ?) to the 3 Gecko's that
drive the steppers.

[Right- one of the control programs like TurboCNC. These replace the
proprietary controls and built-in computers (think Centroid, AllenBradley,
DeltaTau, Fadal) that used to be the only way to run machine tools. ]

A power supply runs the Gecko / Steppers. Is that all, or am I missing
something ?

Terry
Northwest PA

[There's a lot more assorted stuff you'll need to put a control box
together, but that's essentially the way it works. Depending on the step and
direction signals they get from the PC and the control system that's
running, the Geckos send power to the motors in a series of pulses, each
equivalent to some portion of a step, depending on how your system's
configured. At least that's how I understand it- and I'm sure there will be
someone to step in if I've got it wrong...]

Andrew Werby
www.computersculpture.com

Discussion Thread

Terry D Palmer 2002-10-14 13:08:53 UTC [CAD_CAM_EDM_DRO] Stepper for Homier and other questions Andrew Werby 2002-10-14 17:41:02 UTC Stepper for Homier and other questions turbulatordude 2002-10-15 05:07:18 UTC Re: Stepper for Homier (mini-mill) and other questions Terry D Palmer 2002-10-15 12:33:51 UTC Re: [CAD_CAM_EDM_DRO] Stepper for Homier and other questions Terry D Palmer 2002-10-15 12:33:51 UTC [CAD_CAM_EDM_DRO] Re: Stepper for Homier (mini-mill) and other questions alenz2002 2002-10-15 18:23:59 UTC Re: Stepper for Homier and other questions Terry D Palmer 2002-10-16 08:19:10 UTC [CAD_CAM_EDM_DRO] Re: Stepper for Homier and other questions