CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Looking for spindles [cutters]

Posted by Brian
on 2002-10-15 16:08:19 UTC
Hi, well that "black coating" probably is Nitride coating, i know the
Bearing industry uses that process on most carbide for cutting steels like
4140,52100,440c, 17-4ph.....The bearing plant i am familiar with has their
own oven system and routinely coats their cutters after sharpening. cul
brian f.
----- Original Message -----
From: "dakota8833" <dakota8833@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, October 15, 2002 4:28 PM
Subject: [CAD_CAM_EDM_DRO] Re: Looking for spindles [cutters]


> --- In CAD_CAM_EDM_DRO@y..., RichD <cmsteam@s...> wrote:
> > Jon,
> > Well, you can see the "case" surface layer along the ground edge and
> > examining a new cutter has the same dark color all over the
> sharpened end
> > and edge. It really looks as tho a post treatment has occured.
> > There is the usual brazed joint at the steel shank interface.
> > I'm mad and puzzled! I got stuck for what was advertized.
> > The long shank cutters are hard to find.
> > Has anyone used "Crown" brand engraving cutters?
> > RichD
> >
> Have you tried here ? http://www.tooltech1.com/
>
>
> Frank
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

RichD 2002-10-14 20:24:56 UTC Re: [CAD_CAM_EDM_DRO] Looking for spindles [cutters] Jon Elson 2002-10-14 22:39:08 UTC Re: [CAD_CAM_EDM_DRO] Looking for spindles [cutters] RichD 2002-10-14 23:04:06 UTC Re: [CAD_CAM_EDM_DRO] Looking for spindles [cutters] dakota8833 2002-10-15 13:28:03 UTC Re: Looking for spindles [cutters] Brian 2002-10-15 16:08:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Looking for spindles [cutters]