RE: [CAD_CAM_EDM_DRO] Re: Using Master5 with controller from SuperTech

Since you are using 3 Gecko's you can use Master5 to run a servo system.
The Gecko's take step and direction signals and use them to run servos.
Master5 will handle this quit well I think. You could also use Mach1,
EZ-CNC, TurboCNC or what ever to run your system since the Gecko's take step
and direction signals.

John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia

> -----Original Message-----
> From: Jeff [mailto:rental@...]
> Sent: Thursday, October 17, 2002 16:34 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: Using Master5 with controller from
> SuperTech
>
>
> --- In CAD_CAM_EDM_DRO@y..., "Michael Gamber" <mgamber@c...> wrote:
> > I have the servo taig machine I bought from Super-Tech.
> >
> > The controller uses 3 Gecko servo controllers.
> >
> > Would anyone think I would have trouble using the following
> combination
> > of software:
> >
> > CAD -- Alibre
> > CAM -- VisualMill
> > NC -- Master5
> >
> > Anyone else using a controller from Super-Tech with software other
> than
> > SuperCAM?
> >
> > [Non-text portions of this message have been removed]
>
> I don't believe that Master5 will do servo motors. But Mach1 will be
> able to.. You may want to ask Art over on the Master5 Users Group
> http://groups.yahoo.com/group/Master5/
>
> Jeff Tice
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> as a sister site to the CCED group, as many of the same members
> are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>