Re: [CAD_CAM_EDM_DRO] Re: Capacitors, no CAD, EDM, DRO content but maybe CNC

On Saturday 19 October 2002 11:19 am, you wrote:

Okay I'm retarded. I just realized that I was mixing up resistors and
capacitors. Duh.


> On Saturday 19 October 2002 11:17 am, you wrote:
>
> That's right. Then the capacitance drops when the caps are in paralell,
> right?
>
> > Scot,
> > The voltage ratings of Caps in series is the sum of
> > their individual ratings, and in parallel it's the same
> > as the lowest rating of the individual caps.
> > Bill Higdon
> >
> > > On Friday 18 October 2002 09:45 pm, you wrote:
> > >
> > > But doesn't the voltage rating drop to half when you run caps in series
> > > and double when you run them in paralell?
> > >
> > > Scot
> > >
> > > > SO, say two 33k resistors in series would equal to 66k resistance?
> > > >
> > > > And two 1000uF capacitors in parallel would equal 2000uF
> > > > capacitance??
> > > >
> > > > Regards,
> > > > Jim
> > > >
> > > > --- In CAD_CAM_EDM_DRO@y..., "Lloyd Leung" <lloyd@l...> wrote:
> > > > > So:
> > > > > - Resistors are in series [to gain resistance]
> > > > > - Capacitors are in parallel [to gain uF]
> > > > >
> > > > > I really should remember that, but I've only use it maybe once in
> > > >
> > > > 23
> > > >
> > > > > years [once in my life thus far]
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: wanliker@a... [mailto:wanliker@a...]
> > > > > Sent: October 18, 2002 11:16 PM
> > > > > To: CAD_CAM_EDM_DRO@y...
> > > > > Subject: Re: [CAD_CAM_EDM_DRO] Capacitors, no CAD, EDM, DRO
> > > >
> > > > content but
> > > >
> > > > > maybe CNC
> > > > >
> > > > > In a message dated 10/18/2002 5:15:26 PM Mountain Daylight Time,
> > > > >
> > > > > lloyd@l... writes:
> > > > > > Btw, I forget if that was in series or parallel, it's been a few
> > > > > > months
> > > > >
> > > > > Always in parallel to add values..............Often, makes a nicer
> > > > > package
> > > > > depending on the dimensions......
> > > > > bill
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> > > > it if you have trouble. http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > > > sister site to the CCED group, as many of the same members are there,
> > > > for OT subjects, that are not allowed on the CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> > > > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > >
> > > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > > Moderator: jmelson@... timg@...
> > > > [Moderator] URL to this group:
> > > > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO bill,
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> > > it if you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > > sister site to the CCED group, as many of the same members are there,
> > > for OT subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> > > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > >
> > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: jmelson@... timg@... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> > if you have trouble. http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > sister site to the CCED group, as many of the same members are there, for
> > OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble. http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
> site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/