Re: Has anyone built an SPC display for Digimatic scales?

Hey all,
The caliper_stuff schematic has a diode backward going
from the input of the comparator to ground. The cathode
should be pointing to ground. This is an older schematic
I did awhile back. Also some versions of that code used
serial output to the PC and others parallel. It was a
case of 'I found out enough to get the job done, than
went on to other stuff'. If I can answer any questions,
let me know.
-Lee



--- In CAD_CAM_EDM_DRO@y..., Chris Baugher <cbaugher_yahoo@b...>
wrote:

>
> Ok, I put a file in the files section that should help anyone who

wants to

> use the SPC port on the imported digital calipers and scales.
>
> The file is called "Caliper_stuff.zip"

under "Imported_Caliper_Info".

>
> If anyone has any other questions about interfacing to these units

I would

> be happy to help.
>
> Have fun!
>
> C|
>
> On Sat, 26 Oct 2002, galt1x wrote:
>
> > I have 2 Mitutoyo Digimatic #982-537 displays that I would like

to use

> > with the cheap generic scales because of the application. I have

some info

> > on using Starett scales with Mitutoyo Displays but nothing on the

other.

> >
> > Paul E. Killoy
> >
> > Original Message -----
> > From: "Chris Baugher" <cbaugher_yahoo@b...>
> > To: <CAD_CAM_EDM_DRO@y...>
> > Sent: Friday, October 25, 2002 4:37 PM
> > Subject: Re: [CAD_CAM_EDM_DRO] Has anyone built an SPC display

for Digimatic

> > scales?
> >
> >
> > >
> > > When you say digimatic do you mean the Mitutoyo scales or the
> > > cheap imported ones?
> > >
> > > C|
> > >
> > > On Fri, 25 Oct 2002, emotorwerks wrote:
> > >
> > > > I am looking around for info related to SPC and how to build

a remote

> > > > display. I haven't found much yet. Does anyone have

pictures,

> > > > plans, links, or ideas on how to do this?
> > > >
> > > > Thanks,
> > > > Jamie
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@y...
> > > >
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > > Moderator: jmelson@a... timg@k... [Moderator]
> > > > URL to this group:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it if

> > you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider

this to be a

> > sister site to the CCED group, as many of the same members are

there, for OT

> > subjects, that are not allowed on the CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM.

> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > bill
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@y...
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it if

> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a

> > sister site to the CCED group, as many of the same members are

there, for OT

> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM.

> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> > >
> > >
> > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@y...
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.

> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.

> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........

> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >
> >