Re: Bridgeport Series II CNC specifications - Picture...

If the link below is "un-wordwrapped" you can access a picture of
this beauty:

http://ebay0.ipixmedia.com/abc/M28/_EBAY_089c07301
d88b1c96c284384e8dbfad4/i-1_B_L.JPG

Is this like the one you are referring, Steve?
At least I won't have to worry about someone walking off with it. :-)

--- In CAD_CAM_EDM_DRO@y..., "stvracer90" <stvracer@s...> wrote:
> Hi Tim
> My 2HP Series II cnc with the rigid ram and kwik-switch spindle is
> 89" high, 68" deep, 74" wide. With a 96" ceiling I can just get the
> belt cover off for service.
>
> Steve
> SKFab
>
>
> --- In CAD_CAM_EDM_DRO@y..., "tmartin23" <tmartin23@y...> wrote:
> > I have the opportunity to try to squeeze one of these machines
into
> > my garage and I have been having difficulty finding out the
> > dimensions of this beast. This is an early 1980's Boss5 / stepper
> > motor controlled machine with the rigid ram and kwik-switch
> tooling.
> > Does anyone know the specific height requirements? A manual
Series
> > II Special Bridgeport is 84" - I've been told. I know this CNC
> > machine is a bit taller than that. Any ideas?
> >
> > Thanks,
> > Tim