Re: Bridgeport Series II CNC specifications - Picture...

Hi Tim,
That looks like the one I converted to servo with gecko drives and
EMC. These are hard to find in Texas, had to get mine from Alabama.

Steve

--- In CAD_CAM_EDM_DRO@y..., "tmartin23" <tmartin23@y...> wrote:
> If the link below is "un-wordwrapped" you can access a picture of
> this beauty:
>
> http://ebay0.ipixmedia.com/abc/M28/_EBAY_089c07301
> d88b1c96c284384e8dbfad4/i-1_B_L.JPG
>
> Is this like the one you are referring, Steve?
> At least I won't have to worry about someone walking off with it. :-
)
>
> --- In CAD_CAM_EDM_DRO@y..., "stvracer90" <stvracer@s...> wrote:
> > Hi Tim
> > My 2HP Series II cnc with the rigid ram and kwik-switch spindle
is
> > 89" high, 68" deep, 74" wide. With a 96" ceiling I can just get
the
> > belt cover off for service.
> >
> > Steve
> > SKFab
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., "tmartin23" <tmartin23@y...> wrote:
> > > I have the opportunity to try to squeeze one of these machines
> into
> > > my garage and I have been having difficulty finding out the
> > > dimensions of this beast. This is an early 1980's Boss5 /
stepper
> > > motor controlled machine with the rigid ram and kwik-switch
> > tooling.
> > > Does anyone know the specific height requirements? A manual
> Series
> > > II Special Bridgeport is 84" - I've been told. I know this CNC
> > > machine is a bit taller than that. Any ideas?
> > >
> > > Thanks,
> > > Tim