Re: Dual Monitor VisualMill 4.0 problem
Posted by
bschwand
on 2002-11-07 11:48:31 UTC
which video card are you using ?
some cards do not support 3D hardware acceleration on both heads.
bruno
--- In CAD_CAM_EDM_DRO@y..., "Bernard W Randall" <bwjarandall@c...>
wrote:
some cards do not support 3D hardware acceleration on both heads.
bruno
--- In CAD_CAM_EDM_DRO@y..., "Bernard W Randall" <bwjarandall@c...>
wrote:
> --- In CAD_CAM_EDM_DRO@y..., Peter <prenolds@s...> wrote:trend
> Hi Peter,
>
> I've been using dual monitors for the past 3 years and VM is the
> first program that has not worked perfectly on either monitor. Yes,
> I have checked for OpenGL and other issues.
>
> I find the 2 monitor metodology excellent even more so with the
> for electronic documentation.sure
>
> I suspected I was on my own on this one, but someone on the group
> might be trying the same thing.
>
> Regards
> Bernard
>
>
>
> > Hi Bernard,
> >
> > I've worked with VM for several years, but never tried dual
> monitors.
> > I'm assuming you're running an Open-GL graphics card? Are you
> yourissues.
> > graphics card and OS are configured correctly for dual monitors?
> Sorry
> > for going back to basics if you've already eliminated those
> > Maybe you have other apps that already run with dual mon setup soyet.
> you
> > know you setup is ok.. I have one 19" CRT and absoluelty no space
> for a
> > second monitor... My guess is that most users of VM are probably
> not
> > running dual monitors so you may be forging into new territory.
> Good luck!
> >
> > I think this can be considered on-topic? VM is CAM.
> >
> > Cheers, Peter
> >
> >
> >
> > Bernard W Randall wrote:
> >
> > >Is anyone on the group using dual monitors with VisualMill 4.0?
> > >
> > >I recently took advantage of the VM/Rhino package but have found
> that
> > >VisualMill doesn't like working on the second monitor, the main
> > >window and toolbars drag but the work area is blank. Also, if I
> move
> > >the shortcut to the second monitor and start the program from
> there
> > >then neither monitor shows a work area.
> > >
> > >I've taken it up with MecSoft but don't have a resolution as
> > >Just trying to find out if I've got an unique problem or if otherreach
> > >dual monitor users have the same problem.
> > >
> > >Thanks,
> > >
> > >Bernard Randall
> > >
> > >
> > >
> > >Addresses:
> > >FAQ: http://www.ktmarketing.com/faq.html
> > >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >Post Messages: CAD_CAM_EDM_DRO@y...
> > >
> > >Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > >List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > >Moderator: jmelson@a... timg@k... [Moderator]
> > >URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > >OFF Topic POSTS: General Machining
> > >If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> it if you have trouble.to
> > >http://www.metalworking.com/news_servers.html
> > >
> > >http://groups.yahoo.com/group/jobshophomeshop I consider this
> be a sister site to the CCED group, as many of the same members arePOSTING
> there, for OT subjects, that are not allowed on the CCED list.
> > >
> > >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NOEXCEPTIONS........
> > >bill
> > >List Mom
> > >List Owner
> > >
> > >
> > >
> > >Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
Discussion Thread
Bernard W Randall
2002-11-07 00:54:28 UTC
Dual Monitor VisualMill 4.0 problem
Peter
2002-11-07 06:41:45 UTC
Re: [CAD_CAM_EDM_DRO] Dual Monitor VisualMill 4.0 problem
Bernard W Randall
2002-11-07 08:35:40 UTC
Re: Dual Monitor VisualMill 4.0 problem
bschwand
2002-11-07 11:48:31 UTC
Re: Dual Monitor VisualMill 4.0 problem
Bernard W Randall
2002-11-08 07:22:38 UTC
Re: Dual Monitor VisualMill 4.0 problem