CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds

Posted by JJ
on 2002-11-08 05:34:21 UTC
I haven't seen those before, nice for some applications. The 0.105
flange side wouldn't work for Ics and the like, and would require a good
deal of board space. The lowly piece of wire, as they say, "Works good,
lasts a long time." :-)

Regards,
JJ

Be Kind, Be Careful, Be Yourself



> -----Original Message-----
> From: turbulatordude [mailto:davemucha@...]
> Sent: Friday, November 08, 2002 7:56 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds
>
>
> --- In CAD_CAM_EDM_DRO@y..., "ajv2803959" <antonio-ximenez@t...>
> wrote:
> > How do you make the plated holes ????
>
>
> eyelets
>
> http://www.keyelco.com/kec/pdfs/p88.pdf
>
> digi-key P/N 22k-nd 23k-nd
>
>
> drill holes, insert eyelet and solder.
>
> In my attempts, I found that more time makeing traces stay on one
> side of the board and reducing the need for plated thruholes, the
> faster the assembly goes. and in more than a few cases, I found one
> sided boards can be done with little additional effort.
>
> Dave
>
>
>
>
>
> >
> > Thanks in advance
> > --- In CAD_CAM_EDM_DRO@y..., "JJ" <jj5412@e...> wrote:
> > > I used the unipolar drives while milling the bipolar driver
> boards.
> > > All you'll need is a 0.020" endmill, a few small drill bits, and
> > blank
> > > double-sided PC board.
> > >
> > > I'm working now to eliminate the tiny slivers left between some
> > tracks.
> > > This should eliminate most of the hand work to dress up the board.
> > >
> > > Regards,
> > > JJ
> > >
> > > Be Kind, Be Careful, Be Yourself
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: JanRwl@A... [mailto:JanRwl@A...]
> > > > Sent: Tuesday, November 05, 2002 11:04 PM
> > > > To: CAD_CAM_EDM_DRO@y...
> > > > Subject: Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds
> > > >
> > > >
> > > > In a message dated 11/5/2002 8:37:04 PM Central Standard Time,
> > > > jj5412@e... writes:
> > > >
> > > > > Incidentally, I used the machine to mill it's own driver
> > > > boards. I think
> > > > > that's cool.
> > > >
> > > > Yes! Chicken or egg? How possible? You use some
> > > > "temporary" drivers,
> > > > first?
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@y...
> > > >
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > > Moderator: jmelson@a... timg@k...
> > > > [Moderator]
> > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > > > to reach it if you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> to
> > be a
> > > sister site to the CCED group, as many of the same members are
> > there,
> > > for OT subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING
> > THEM.
> > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@...
> [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Discussion Thread

Marv Frankel 2002-11-03 07:54:39 UTC Stepper motor speeds turbulatordude 2002-11-03 08:26:35 UTC Re: Stepper motor speeds Tim Goldstein 2002-11-03 08:41:48 UTC RE: [CAD_CAM_EDM_DRO] Stepper motor speeds Marv Frankel 2002-11-03 14:03:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Tim Goldstein 2002-11-03 14:14:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Bryan Mumford 2002-11-03 15:43:50 UTC [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Tim Goldstein 2002-11-03 16:14:24 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Bryan Mumford 2002-11-03 16:35:53 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Bryan Mumford 2002-11-03 17:06:36 UTC [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Carol & Jerry Jankura 2002-11-03 17:12:32 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Bryan Mumford 2002-11-03 17:37:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Tim Goldstein 2002-11-03 18:12:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Tim Goldstein 2002-11-03 18:12:48 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Marv Frankel 2002-11-03 18:17:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Tim Goldstein 2002-11-03 18:22:15 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Shelbyville Design & Signworks 2002-11-03 19:53:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds B Snowden 2002-11-03 19:53:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Carol & Jerry Jankura 2002-11-03 20:32:03 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Marv Frankel 2002-11-03 23:27:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Tony Jeffree 2002-11-03 23:30:23 UTC Re: Stepper motor speeds Tim Goldstein 2002-11-03 23:42:54 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds Tony Jeffree 2002-11-04 01:19:52 UTC Re: Stepper motor speeds turbulatordude 2002-11-04 07:10:12 UTC Stepper vs Servo ( was Re: Stepper motor speeds turbulatordude 2002-11-04 07:59:06 UTC Re: Stepper motor speeds Tim Goldstein 2002-11-04 09:42:48 UTC Re: [CAD_CAM_EDM_DRO] Stepper vs Servo ( was Re: Stepper motor speeds JJ 2002-11-05 18:22:10 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds JanRwl@A... 2002-11-05 20:03:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds JJ 2002-11-06 03:55:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds ajv2803959 2002-11-06 08:20:14 UTC Re: Stepper motor speeds JanRwl@A... 2002-11-06 15:18:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds MIKEC@W... 2002-11-06 20:56:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds sconkworks 2002-11-07 20:20:01 UTC Re: Stepper motor speeds JJ 2002-11-08 04:11:02 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds turbulatordude 2002-11-08 04:56:37 UTC Re: Stepper motor speeds JJ 2002-11-08 05:34:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Stepper motor speeds