CAD CAM EDM DRO - Yahoo Group Archive

Re: Spindle Interlocks

Posted by vrsculptor
on 2002-11-20 10:04:05 UTC
--- In CAD_CAM_EDM_DRO@y..., "Egroupscdh \(E-mail\)"
<egroupscdh@W...> wrote:
> What is the usual method of interlocking the spindle to be sure
that there
> is no way that the spindle can start while I'm changing tools?
>
Chuck,
Don't trust anything short of a relay. Use the break solinoid on to
open a relay that denies power to the spindle.

Roger

Discussion Thread

Egroupscdh (E-mail) 2002-11-20 08:39:49 UTC Spindle Interlocks vrsculptor 2002-11-20 10:04:05 UTC Re: Spindle Interlocks Egroupscdh (E-mail) 2002-11-22 09:35:03 UTC RE: [CAD_CAM_EDM_DRO] Re: Spindle Interlocks Kory Hamzeh 2002-11-22 15:13:16 UTC Motor/Leadscrew Couplers Jim Brown 2002-11-22 15:36:41 UTC Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers Lee Studley 2002-11-22 16:24:34 UTC Re: Motor/Leadscrew Couplers George Erhart 2002-11-22 19:24:15 UTC Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers Larry Edinger 2002-11-22 19:31:59 UTC Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers JanRwl@A... 2002-11-22 19:34:33 UTC Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers jeffalanp 2002-11-22 19:45:35 UTC Re: Motor/Leadscrew Couplers bjammin@i... 2002-11-22 20:04:52 UTC Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers Marv Frankel 2002-11-22 20:48:02 UTC Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers Kory Hamzeh 2002-11-22 21:27:07 UTC RE: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers Tony Jeffree 2002-11-23 01:24:21 UTC Re: Motor/Leadscrew Couplers Marv Frankel 2002-11-23 04:42:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Motor/Leadscrew Couplers bjammin@i... 2002-11-23 08:38:16 UTC RE: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers