RE: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers
Posted by
Kory Hamzeh
on 2002-11-22 21:27:07 UTC
>Hi,
> You can mount the motor with a hard coupling and let it simply hang there,
> with the motor weight carried by the lead screw bearing. A simple
> drag link
> takes care of the torque. This layout is not particularly sensitive to
> slight misalignment, esp if the link is not over-rigid.
>
What do you mean by "drag link"?
Thanks,
Kory
Discussion Thread
Egroupscdh (E-mail)
2002-11-20 08:39:49 UTC
Spindle Interlocks
vrsculptor
2002-11-20 10:04:05 UTC
Re: Spindle Interlocks
Egroupscdh (E-mail)
2002-11-22 09:35:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: Spindle Interlocks
Kory Hamzeh
2002-11-22 15:13:16 UTC
Motor/Leadscrew Couplers
Jim Brown
2002-11-22 15:36:41 UTC
Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers
Lee Studley
2002-11-22 16:24:34 UTC
Re: Motor/Leadscrew Couplers
George Erhart
2002-11-22 19:24:15 UTC
Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers
Larry Edinger
2002-11-22 19:31:59 UTC
Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers
JanRwl@A...
2002-11-22 19:34:33 UTC
Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers
jeffalanp
2002-11-22 19:45:35 UTC
Re: Motor/Leadscrew Couplers
bjammin@i...
2002-11-22 20:04:52 UTC
Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers
Marv Frankel
2002-11-22 20:48:02 UTC
Re: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers
Kory Hamzeh
2002-11-22 21:27:07 UTC
RE: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers
Tony Jeffree
2002-11-23 01:24:21 UTC
Re: Motor/Leadscrew Couplers
Marv Frankel
2002-11-23 04:42:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Motor/Leadscrew Couplers
bjammin@i...
2002-11-23 08:38:16 UTC
RE: [CAD_CAM_EDM_DRO] Motor/Leadscrew Couplers