Re: [CAD_CAM_EDM_DRO] Re: 3D Contouring - Loss of Accuracy - Follow-Up

Hi Fred,

I haven't backplotted the file because I'm posting files using G90 -
absolute mode. But I'll send a file over just to be sure. Thx.

Cheers, Peter

Fred Smith wrote:

>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Peter <prenolds@s...> wrote:
>
>>If anyone is interested in running a "problem" 3D contour test file
>>
>on
>
>>their own system - contact me off list with some info about your
>>
>machine
>
>>envelope, max speeds, inches or mm etc. and any other issues
>>
>related
>
>>to the syntax of your g-code file. I will generate a suitable test
>>file.
>>
>
>Peter,I believe that I saw some information that you were cutting in
>relative mode. Have you actually backplotted the code and confirmed
>that your program does indeed return to the 0,0 point? Do you still
>have the same problem if you program in Absolute (G90)?
>
>Zip up an NC file and e-mail it to me. I will back plot it in Vector
>Cam and check to see if the end point is the same as the start.
>
>Best Regards,
>
>Fred Smith - IMService
>
>imserv @ imsrv.com
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>