CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides

Posted by alex
on 2002-12-19 09:42:00 UTC
May be to do some kind of a lever arrangement?
Put a toolbit into one end and pull the fish scale at another end - probably
will require a considerable leverage there.
Just a thought.
Alex
----- Original Message -----
From: Lloyd Leung <lloyd@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, December 19, 2002 11:01 AM
Subject: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides


> Currently my lathe is CNCed, but the stroke on Schaublin 102N is very
> short. It's about 90mm x 100mm (Longitudinal x transverse stroke).
>
>
>
> So what I'm thinking of doing is removing the XZ gantry and putting in
> some linear slides that are more to my liking. The size I'm thinking of
> is 300mm x 100mm.
>
>
>
> I'm wondering what amount of force will be exerted onto the ways, if
> cutting titanium, aluminium, and stainless. Aluminium would probably be
> harmless. But titanium and stainless, they would exert a much greater
> force into the ways. So my question is how force is being exerted to
> the ways? Does anyone know how I can calculate this force?
>
>
>
> I know this has to do with the RPM of the spindle, the power of my
> motor, and the depth that I'm cutting at. I would like to figure out
> how much force is transferred into the lathe. Where can I find a chart
> or a formula to figure this out?
>
>
>
> The type of linear slides I'm thinking of using are the DualVee linear
> tracks from Bishop Wisecarver www.bwc.com <http://www.bwc.com/> they
> are moderately priced [a few hundred Canadian dollars]
>
>
>
> I am not affiliated with BWC in any capacity. I just found their system
> very simple. I would like to hear from anyone their thoughts on their
> products.
>
>
>
> Cheers.
>
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

Lloyd Leung 2002-12-19 08:01:30 UTC Bishop Wisecarver linear slides alex 2002-12-19 09:42:00 UTC Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides alex 2002-12-19 10:06:11 UTC Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides turbulatordude <davemucha@j... 2002-12-19 13:00:28 UTC Calculating lathe hp - tutorial -( was Re: Bishop Wisecarver linear slides JanRwl@A... 2002-12-19 13:16:48 UTC Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides Lloyd Leung 2002-12-19 15:54:13 UTC RE: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides James Cullins 2002-12-19 18:54:41 UTC Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides Dave Kowalczyk <dkowalcz@d... 2002-12-20 20:24:07 UTC Re: Bishop Wisecarver linear slides