Calculating lathe hp - tutorial -( was Re: Bishop Wisecarver linear slides
Posted by
turbulatordude <davemucha@j...
on 2002-12-19 13:00:28 UTC
I'm not sure if this will help, it goes more to hp needed for spindle
to make cuts.
Dave
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Lloyd Leung" <lloyd@l...>
wrote:
to make cuts.
Dave
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Lloyd Leung" <lloyd@l...>
wrote:
> Currently my lathe is CNCed, but the stroke on Schaublin 102N isvery
> short. It's about 90mm x 100mm (Longitudinal x transverse stroke).in
>
>
>
> So what I'm thinking of doing is removing the XZ gantry and putting
> some linear slides that are more to my liking. The size I'mthinking of
> is 300mm x 100mm.probably be
>
>
>
> I'm wondering what amount of force will be exerted onto the ways, if
> cutting titanium, aluminium, and stainless. Aluminium would
> harmless. But titanium and stainless, they would exert a muchgreater
> force into the ways. So my question is how force is being exertedto
> the ways? Does anyone know how I can calculate this force?out
>
>
>
> I know this has to do with the RPM of the spindle, the power of my
> motor, and the depth that I'm cutting at. I would like to figure
> how much force is transferred into the lathe. Where can I find achart
> or a formula to figure this out?linear
>
>
>
> The type of linear slides I'm thinking of using are the DualVee
> tracks from Bishop Wisecarver www.bwc.com <http://www.bwc.com/>they
> are moderately priced [a few hundred Canadian dollars]system
>
>
>
> I am not affiliated with BWC in any capacity. I just found their
> very simple. I would like to hear from anyone their thoughts ontheir
> products.
>
>
>
> Cheers.
>
>
>
> [Non-text portions of this message have been removed]
Discussion Thread
Lloyd Leung
2002-12-19 08:01:30 UTC
Bishop Wisecarver linear slides
alex
2002-12-19 09:42:00 UTC
Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides
alex
2002-12-19 10:06:11 UTC
Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides
turbulatordude <davemucha@j...
2002-12-19 13:00:28 UTC
Calculating lathe hp - tutorial -( was Re: Bishop Wisecarver linear slides
JanRwl@A...
2002-12-19 13:16:48 UTC
Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides
Lloyd Leung
2002-12-19 15:54:13 UTC
RE: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides
James Cullins
2002-12-19 18:54:41 UTC
Re: [CAD_CAM_EDM_DRO] Bishop Wisecarver linear slides
Dave Kowalczyk <dkowalcz@d...
2002-12-20 20:24:07 UTC
Re: Bishop Wisecarver linear slides