CAD CAM EDM DRO - Yahoo Group Archive

Re: another limitswitch quest...

on 2002-12-31 22:02:39 UTC
Jens,

I am using fork type opto-switches I bought off the web. Though not
specified they are Schmitt trigger output, repeatability was +-
0.0002, but that might have been my dial indicator. Output is +5
going to 0v when the beam is interupted, switch hysterisis is 0.003".

Both X switches are mounted in a Radio Shack plastic box with slots
machined in both ends for the blades to enter and I have mounted felt
wiping strips that clean the blades. Y & X switches are mounted on
some cut down 620 extrusion so I can easily adjust position.

So far no problems.

Bernard

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Jens Swales
<jipeess2000@y...>" <jipeess2000@y...> wrote:
> hi all
>
> i was thinking of swap my mechanical microswitches to optos, fork-
> stylys, that reacts when a object (nock, actuator or whatever) goes
> in the led/transistor gap. does anyone know how this works in a
shop-
> environment, with all dust and dirt that sooner or later gonna
cover
> both led and transistor with a fine layer.
>
>
> js

Discussion Thread

Jens Swales <jipeess2000@y... 2002-12-31 13:24:27 UTC another limitswitch quest... Bernard W Randall <bwjarandall@c... 2002-12-31 22:02:39 UTC Re: another limitswitch quest... Bill Higdon 2003-01-03 01:28:59 UTC Re: [CAD_CAM_EDM_DRO] another limitswitch quest... Hans Wedemeyer 2003-01-03 06:36:50 UTC Re: [CAD_CAM_EDM_DRO] another limitswitch quest... Nigel Bailey 2003-01-03 07:11:08 UTC RE: [CAD_CAM_EDM_DRO] another limitswitch quest...