RE: [CAD_CAM_EDM_DRO] Gecko 320 & 340

It is right at the top of the CNC page

John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia

> -----Original Message-----
> From: alex [mailto:telecomt@...]
> Sent: Friday, January 03, 2003 13:14 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Gecko 320 & 340
>
>
> Tim,
> can you please give a link for a DRO info from Dan - I couldn't find it.
> Alex
> ----- Original Message -----
> From: Tim Goldstein <timg@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, January 03, 2003 1:26 PM
> Subject: Re: [CAD_CAM_EDM_DRO] Gecko 320 & 340
>
>
> > http://www.ktmarketing.com/CNC.html in the "How to's, instuctions,
> > documentation, etc" section. Second from the bottom labeled "Gecko G320
> > wiring how to diagram by Donald Brock"
> >
> > It is not anything complicated. Logic to the computer and power supply
> wires
> > up just like a G201/210. 2 wires to the motor and then 4 wired to the
> > encoder. If the drive makes the motor jump and than faults
> immediately try
> > reversing the motor wires as you probably have the encode and motor
> working
> > in opposite directions. You could also reverse the A & B
> channel form the
> > encoder instead, but only change motor or encoder not both.
> >
> > Tim
> > [Denver, CO]
> > Sherline products at Deep Discount
> > Mach1 & DeskCNC with Credit Card ordering
> > www.KTMarketing.com/Sherline
> > www.KTMarketing.com/DeskCNC
> >
> >
> >
> > ----- Original Message -----
> >
> > > Hi
> > > Is there a place I can get a GENERAL wiring diagram for the Gecko 320
> > > Servo Drive .
> > > I'm familiar with steppers but have never used the servos ,and would
> > > like to see how they wire up with the encoders and all .
> > > No I couldn't find ANYTHING on geckodrive.com except the Installation
> > > notes .
> > >
> > > Thanks
> > > Ron K
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are
> there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/