CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] CAD_CAM_EDM_DRO spindle to motor connection

Posted by Marcus & Eva
on 2003-01-22 08:16:51 UTC
Hi Ivan:
Do you remember those old fashioned drills the dentist had when you were
a kid?
Not the howler; the one with the belts that used to rattle your head off.
Many pantographs and engravers use a similar system with round belts.
They are set up exactly as you intend: fixed motor and moveable spindle.
Complex and expensive to make, but works well.
Cheers

Marcus

----- Original Message -----
From: <ouisel@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, January 22, 2003 5:08 AM
Subject: [CAD_CAM_EDM_DRO] CAD_CAM_EDM_DRO spindle to motor connection


> Does anyone have suggestions on how to connect a motor to mill
> spindle so the motor doesn't run up and down with the spindle -
> without having to cut internal splines? Most of the designs I've been
> seeing show the motor traveling with the head - I want to mount the
> motor separately to reduce the mass on the head.
>
> Thanks in advance.
> Ivan
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Ivan Nichols <ouisel@v... 2003-01-22 05:08:50 UTC CAD_CAM_EDM_DRO spindle to motor connection Marcus & Eva 2003-01-22 08:16:51 UTC Re: [CAD_CAM_EDM_DRO] CAD_CAM_EDM_DRO spindle to motor connection CL 2003-01-22 10:37:45 UTC Re: [CAD_CAM_EDM_DRO] CAD_CAM_EDM_DRO spindle to motor connection ballendo <ballendo@y... 2003-01-23 04:47:59 UTC Re: CAD_CAM_EDM_DRO spindle to motor connection Hoyt McKagen 2003-01-23 07:30:35 UTC spindle to motor connection Randy Gordon-Gilmore 2003-01-23 10:31:01 UTC Re: spindle to motor connection ballendo <ballendo@y... 2003-01-23 11:23:14 UTC Re: spindle to motor connection ballendo <ballendo@y... 2003-01-23 11:36:13 UTC Re: spindle to motor connection