CAD CAM EDM DRO - Yahoo Group Archive

Re: OT - 1" Timing belt suppliers

on 2003-01-22 21:10:12 UTC
John at JJC Associates can get you ANY belt you want, no matter what
pitch, length or width. I came across him on my Porsche supercharger
project. Great guy to deal with too. He is actually located close
to me and I picked some belts up from him. He showed me the custom
machine he has to trim belts to any width he wants. Very reasonable
pricing too. I would also recomend you use the Gates PolyGrip GT2
belt. http://jjcassociates.com/

Mark
www.mark.hargett.com

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Bernard R
<bwjarandall@c...>" <bwjarandall@c...> wrote:
> Does anyone know of 1" wide 5MM HTD timing belt distributors? I
have
> searched SDP, McMaster, Gates, York. All can supply up to 15mm
wide
> but none go beyond that.
>
> Brecoflex can supply, but have a minimum order of $100.
>
> Though OT, 1" belts are the recommended size for BP sized machines,
> so I suspect that other list members currently doing re-fits will
> have the same problem.
>
> TIA
>
> Bernard

Discussion Thread

Bernard R <bwjarandall@c... 2003-01-22 20:00:48 UTC OT - 1" Timing belt suppliers natchamp_87 <mark@h... 2003-01-22 21:10:12 UTC Re: OT - 1" Timing belt suppliers Jerry Kimberlin 2003-01-22 22:49:46 UTC Re: [CAD_CAM_EDM_DRO] OT - 1" Timing belt suppliers ballendo <ballendo@y... 2003-01-23 06:04:45 UTC Re: OT - 1" Timing belt suppliers deanc500 <deancouillard@s... 2003-01-23 07:55:52 UTC Re: OT - 1" Timing belt suppliers Dan Mauch 2003-01-23 08:10:23 UTC RE: [CAD_CAM_EDM_DRO] OT - 1" Timing belt suppliers