RE: [CAD_CAM_EDM_DRO] Re: cable chain ?cable guides ?

Hey mate, they ere in 33" lengths at $10.00 per 33", is two lengths (66"
enough or Ill send you an extra 12 " for $5.00. Shipping in the US is
$4.00 via US mail.

David


-----Original Message-----
From: turbulatordude <davemucha@...> [mailto:davemucha@...]
Sent: Thursday, February 06, 2003 10:34 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: cable chain ?cable guides ?

I am looking for about 6 feet of the stuff.

if you sell direct, let me know what you have available.

Dave





--- In CAD_CAM_EDM_DRO@yahoogroups.com, "David" <aussiedude@e...>
wrote:

> I am currently selling IGUS cable guide on Ebay, is this the kind of
> stuff you are talking about? The opening ia about 1/2 X 3/4 which

seems

> more than big enough for hobbyist size machines. At present I am

selling

> them at an average of about $10.00 for a 33" long section, although
> they can be separated into smaller or joined into longer lengths. At
> this point I only have about 20 lengths left so if anyone on the

list is

> interested I would be glad to help out list members. I will include

a

> link just so you can see the info, not as a sales pitch.
> Discussions should be on list but to purchase contact me off list.
>
> Ebay link :
> http://cgi.ebay.com/ws/eBayISAPI.dll?

ViewItem&category=11805&item=330888

> 0223&rd=1
>
>
>
> -----Original Message-----
> From: turbulatordude <davemucha@j...> [mailto:davemucha@j...]
> Sent: Thursday, February 06, 2003 7:47 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] cable chain ?
>
> I have looked at the plastic stuff and am amazed that it costs so
> much per foot.
>
> I recently had some parts made in stamped steel.
>
> would a stainless cable chain be better than plastic?
>
> I was thinking of having a run of stampings then assembling them

for

> my projects. seeems easy to do and having a box laying around

would

> be great for the next projects.
>
> The questions are how big of an opening ? seems a one inch square
> would hold all my wires. 1/2 x 1/5" would lay flatter and offer
> better clearnace.
>
> would I be better off using a pair, side by side, one for the 220

for

> the motor and the rest for the steppers/servo's/switches ?
>
> It seems that a simple spacer with a couple screws and that would

be

> the linkage and pins.
>
> I figure that if they cost $1.00 per part, 2" long, then it is only
> $6.00 per foot. for my 10 ft unit would only need 6 feet, but then
> it would be more home brew than store bought.
>
> any comments ?
>
> If I did this would there be any interest in getting some ? the

more

> I can get made, the cheaper the parts would be.
>
> Dave
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> timg@k...
> Moderator: pentam@c... indigo_red@q... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it

> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to

be a

> sister site to the CCED group, as many of the same members are

there,

> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING

THEM.

> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/