Re: [CAD_CAM_EDM_DRO] Gerber to G-Code

Go to http://kellyware.com/ his program will read DXF,Gcode , HPGL, and
Gerber. It is a windows based program and has some nice features but is not
as fast or smooth as Mach1.
Jim

----- Original Message -----
From: "Keith Sloan" <keith.sloan@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, February 07, 2003 7:55 AM
Subject: [CAD_CAM_EDM_DRO] Gerber to G-Code


> Never tried it but a theoretical free but convoluted way is
>
> Use Eagle Power tools to go Gerber -> Eagle
> Use outlines.ulp to create outlines of traces.
> Then use DXF or HPGL output to then go
> DXF -> G-code with Master 5/Mach etc.
>
> Eagle is free for small boards and assumes you have a free DXF/HPGL ->
G-code.
>
> Keith Sloan
>
> ----------------------------------------------
> This mail sent through http://www.ukonline.net
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>