Re: [CAD_CAM_EDM_DRO] Feedback/DRO DIY

There is Kulaga/Mauch card.
I believe its in a public domain now.
Alex

----- Original Message -----
From: <abbylynx@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 19, 2003 7:18 AM
Subject: [CAD_CAM_EDM_DRO] Feedback/DRO DIY


> Hi again folks,
>
> Just looking at an interesting page someone made with a tutorial on
> building your own ISA DRO card for under "fiddy dowwah". <a
> href="http://www.boondog.com/%5Ctutorials%5C7266%
> 5C7266.htm#Initialization">HERE</a>
>
> It's only 2 axis, but you could just make another one and put it on a
> separate IO address to give you 4 axis. Could something like this be
> made to work with EMC and a step/dir driver? Or would that require
> some major hacking and recompiling?
>
> As I've had and keep seeming to have all kinds of problems with lost
> steps, I've become very distrusting of my mill setup, so something
> like this seems the way to go. Does anyone know of any prebuilt
> DRO/feedback systems that are somewhat low cost? (The cheapest I've
> seen a DRO card for was about $200 - definatelt not worth the price).
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>