Crimping Connectors for Pac Sci PowerMax Motors?
Posted by
sciciora
on 2003-03-05 15:07:52 UTC
I've never had much luck attaching wires to these connectors (never
had the expensive tool). I always pushed the wire on best as I
could, then soldered it on, making a gooy mess of the connector. How
do you guys attach wires to these connectors? Here is a drawing:
http://rocky.digikey.com/WebLib/Amp/Web%20Data/641653.pdf
Here are links to order the connector and hood:
http://www.digikey.com/scripts/us/dksus.dll?Detail?Ref=62241&Row=11281
0
http://www.digikey.com/scripts/us/dksus.dll?Detail?Ref=62502&Row=11026
1
- Steven Ciciora
had the expensive tool). I always pushed the wire on best as I
could, then soldered it on, making a gooy mess of the connector. How
do you guys attach wires to these connectors? Here is a drawing:
http://rocky.digikey.com/WebLib/Amp/Web%20Data/641653.pdf
Here are links to order the connector and hood:
http://www.digikey.com/scripts/us/dksus.dll?Detail?Ref=62241&Row=11281
0
http://www.digikey.com/scripts/us/dksus.dll?Detail?Ref=62502&Row=11026
1
- Steven Ciciora
--- In CAD_CAM_EDM_DRO@yahoogroups.com, RichD <cmsteam@s...> wrote:
> murray,
> Double check this, but mine are Amp parts from Digikey p/n A23924-ND
connector
> and p/n A19276-ND cover strain relief. 8 pin.
> At first they to not fit, but in fact they are the correct type.
> RichD
>
> "mmurray70 " wrote:
> >
> > Just got 3 new Powermax II motors and I'm wondering where to get
the
> > connectors that fit into them. Any adice? Thanks.
Discussion Thread
RichD
2003-02-27 20:37:28 UTC
Re: [CAD_CAM_EDM_DRO] Connector for Pacific Scientific Motor?
dcdziner
2003-02-28 00:09:07 UTC
Re: [CAD_CAM_EDM_DRO] Connector for Pacific Scientific Motor?
Tim Goldstein
2003-02-28 07:37:58 UTC
RE: [CAD_CAM_EDM_DRO] Connector for Pacific Scientific Motor?
George Erhart
2003-02-28 07:59:03 UTC
Re: [CAD_CAM_EDM_DRO] Connector for Pacific Scientific Motor?
sciciora
2003-03-05 15:07:52 UTC
Crimping Connectors for Pac Sci PowerMax Motors?
Bill Higdon
2003-03-05 16:59:57 UTC
Re: [CAD_CAM_EDM_DRO] Crimping Connectors for Pac Sci PowerMax Motors?
dcdziner
2003-03-06 07:59:43 UTC
Re: [CAD_CAM_EDM_DRO] Crimping Connectors for Pac Sci PowerMax Motors?