CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Crimping Connectors for Pac Sci PowerMax Motors?

Posted by Bill Higdon
on 2003-03-05 16:59:57 UTC
I've used a crimper from Radio Shack (for DB type connecors) to crimp
wires for similar connectors before. Bill Higdon

sciciora wrote:
> I've never had much luck attaching wires to these connectors (never
> had the expensive tool). I always pushed the wire on best as I
> could, then soldered it on, making a gooy mess of the connector. How
> do you guys attach wires to these connectors? Here is a drawing:
>
> http://rocky.digikey.com/WebLib/Amp/Web%20Data/641653.pdf
>
> Here are links to order the connector and hood:
> http://www.digikey.com/scripts/us/dksus.dll?Detail?Ref=62241&Row=11281
> 0
>
> http://www.digikey.com/scripts/us/dksus.dll?Detail?Ref=62502&Row=11026
> 1
>
> - Steven Ciciora
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, RichD <cmsteam@s...> wrote:
>
>>murray,
>>Double check this, but mine are Amp parts from Digikey p/n A23924-ND
>
> connector
>
>>and p/n A19276-ND cover strain relief. 8 pin.
>>At first they to not fit, but in fact they are the correct type.
>>RichD
>>
>>"mmurray70 " wrote:
>>
>>>Just got 3 new Powermax II motors and I'm wondering where to get
>>
> the
>
>>>connectors that fit into them. Any adice? Thanks.

Discussion Thread

RichD 2003-02-27 20:37:28 UTC Re: [CAD_CAM_EDM_DRO] Connector for Pacific Scientific Motor? dcdziner 2003-02-28 00:09:07 UTC Re: [CAD_CAM_EDM_DRO] Connector for Pacific Scientific Motor? Tim Goldstein 2003-02-28 07:37:58 UTC RE: [CAD_CAM_EDM_DRO] Connector for Pacific Scientific Motor? George Erhart 2003-02-28 07:59:03 UTC Re: [CAD_CAM_EDM_DRO] Connector for Pacific Scientific Motor? sciciora 2003-03-05 15:07:52 UTC Crimping Connectors for Pac Sci PowerMax Motors? Bill Higdon 2003-03-05 16:59:57 UTC Re: [CAD_CAM_EDM_DRO] Crimping Connectors for Pac Sci PowerMax Motors? dcdziner 2003-03-06 07:59:43 UTC Re: [CAD_CAM_EDM_DRO] Crimping Connectors for Pac Sci PowerMax Motors?