Re: [CAD_CAM_EDM_DRO] Crimping Connectors for Pac Sci PowerMax Motors?

Steven,
I may not be fast, but I'm good. There is a termination hand tool
available from Digi-Key, part #59803-1, for $16.28. The alternative is a
Handle/Head combination, that cost $498.00. The choice is very easy.

Marv Frankel
Los Angeles

----- Original Message -----
From: "sciciora" <sciciora@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, March 05, 2003 3:07 PM
Subject: [CAD_CAM_EDM_DRO] Crimping Connectors for Pac Sci PowerMax Motors?


> I've never had much luck attaching wires to these connectors (never
> had the expensive tool). I always pushed the wire on best as I
> could, then soldered it on, making a gooy mess of the connector. How
> do you guys attach wires to these connectors? Here is a drawing:
>
> http://rocky.digikey.com/WebLib/Amp/Web%20Data/641653.pdf
>
> Here are links to order the connector and hood:
> http://www.digikey.com/scripts/us/dksus.dll?Detail?Ref=62241&Row=11281
> 0
>
> http://www.digikey.com/scripts/us/dksus.dll?Detail?Ref=62502&Row=11026
> 1
>
> - Steven Ciciora
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, RichD <cmsteam@s...> wrote:
> > murray,
> > Double check this, but mine are Amp parts from Digikey p/n A23924-ND
> connector
> > and p/n A19276-ND cover strain relief. 8 pin.
> > At first they to not fit, but in fact they are the correct type.
> > RichD
> >
> > "mmurray70 " wrote:
> > >
> > > Just got 3 new Powermax II motors and I'm wondering where to get
> the
> > > connectors that fit into them. Any adice? Thanks.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>