Re: [CAD_CAM_EDM_DRO] Parallel Port Boards?

Bill,

Thanks for your interest in our new PC-2-Router break-out board.

We have just started to ship the new PC-2-Route break-out board for Mach1.

The details are on my web page at www.campbelldesigns.com .

Mach1 can output a 15khz pulse string to pin 17 on the parallel port. The
new break-out board detects this pulse string and enables pins 1, 14 and 16
for outputs. the outputs can be uses to turn on things like spindles, vacuum
pumps or coolants (through a solid state relay). If the 15khz signal is not
present, the outputs will not be enabled. This will prevent outputs from
coming on when Mach1 does not have control.

Bob Campbell

----- Original Message -----
From: "Bill Blackburn" <blckburn@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, March 11, 2003 12:00 AM
Subject: [CAD_CAM_EDM_DRO] Parallel Port Boards?


> Has anyone used the Sound Logic PC-2-Route Model M1 (PC Parallel Port
> Break Out Board) ??
> Please give all pros & cons.
>
> How does the PC-2-Route compare to the PMDX-120 Parallel Port Accessory
> Module? Using Gecko G320 Drives.
>
> The PC-2-Route Model M1 is suppose to be made for "Mach 1" Does it work
> well?
>
> Which board would be better for using with "Mach 1" ?
>
> Which one would be more adaptable to other programs?
>
>
> Web page for PC-2-Route Model M1
> http://www.campbelldesigns.com/breakout_boardr%20Mach1.htm
>
> Web page for PMDX-120 http://www.pmdx.com/
>
> Thanks for the help.
>
> Bill
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>