Re: [CAD_CAM_EDM_DRO] Which rotary table to CNC? [adding to last message]
Posted by
Daniel J. Statman
on 2003-03-26 14:52:14 UTC
FWIW, 1:36 means 36 turns of the handwheel to get 1 rotation of the table.
For $150 more you can get the Sherline 4" rotary table with the NEMA 23
motor mount already installed.
Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...
For $150 more you can get the Sherline 4" rotary table with the NEMA 23
motor mount already installed.
Daniel J. Statman, Statman Designs
www.statmandesigns.com
dan.statman@...
----- Original Message -----
From: "Lloyd Leung" <lloyd@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, March 26, 2003 4:58 PM
Subject: [CAD_CAM_EDM_DRO] Which rotary table to CNC? [adding to last
message]
> I Just realized, looking from LMS, that these rotary tables are so cheap
> because they're 1:36. So ten turns of the hand wheel, I get 1 turn on the
> table. LMS and HF sell the same cheapie table.
>
> With 1:1 gearing, 0.72 degree/step five phase stepper motor, and a gecko
> G201. Max theoretical resolution would be: 5000 steps to gecko G201 -->
> 500 steps to motor --> 1 turn of the motor --> 1 turn of the hand
wheel -->
> 10 degrees of the table.
>
> Would this mean that I have 0.002 degree per step?
>
> I'm wondering is it a good idea to purchase one these? Or go for the 1:72
> gear ratio ones?
>
> Thanks.
>
Discussion Thread
Lloyd Leung
2003-03-26 13:31:30 UTC
Which rotary table to CNC?
Lloyd Leung
2003-03-26 13:58:11 UTC
Which rotary table to CNC? [adding to last message]
ccq@x...
2003-03-26 14:25:23 UTC
Re: [CAD_CAM_EDM_DRO] Which rotary table to CNC?
Daniel J. Statman
2003-03-26 14:52:14 UTC
Re: [CAD_CAM_EDM_DRO] Which rotary table to CNC? [adding to last message]
Lloyd Leung
2003-03-26 15:06:11 UTC
RE: Which rotary table to CNC? [Daniel J. Statman]
Lloyd Leung
2003-03-26 15:09:57 UTC
RE:RE: Which rotary table to CNC? [Daniel J. Statman]
alex
2003-03-26 15:36:43 UTC
Re: [CAD_CAM_EDM_DRO] RE: Which rotary table to CNC? [Daniel J. Statman]
Lloyd Leung
2003-03-26 16:40:56 UTC
RE: RE: RE: Which rotary table to CNC? [Daniel J. Statman]
stevenson_engineers
2003-03-26 17:54:37 UTC
Re: Which rotary table to CNC?
doug98105
2003-03-26 21:36:15 UTC
Re: Which rotary table to CNC?
stevenson_engineers
2003-03-27 00:33:58 UTC
Re: Which rotary table to CNC?
Tony Jeffree
2003-03-27 01:47:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Which rotary table to CNC?
William Scalione
2003-03-29 23:25:55 UTC
Re: [CAD_CAM_EDM_DRO] Which rotary table to CNC? [adding to last message]