Re: Stepper motor specs-THANKS MARISS!

> Regan,
>
> About 50 in-oz for the short motor and about 100 in-oz for the long
> motor.
>
> They seem like good motors, both should be good for 1000 to 2000

> at reduced torque. Use a power supply voltage of 36VDC or less with
> the 1.8V motor and 52VDC or less with the 2.6V motor.
>
> Mariss
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Regan Beaulieu"
> <regan_2002@y...> wrote:
> > Hi,
> > I'm a newbie wanting to find info on a few stepper motors a

> of
> > mine has, these are NEMA23's out of Wang printers.
> > Sanyo Denki Step-Syn
> >
> > Larger motor
> > model 103g715-1240
> > this motor is 3.25" long including flange
> > 2.6v, 3.1A
> >
> > Smaller motor
> > model 103g770-2311
> > 2"long
> > 1.8v, 3A
> >
> > I'm most interested in the larger motor, does anybody have a clue
> > what the torque of these motors is? I would test them, but my
> friend
> > is across the continent in the eastern U.S., while I'm in western
> > Canada.
> > Any help would be much appreciated
> > Regan