CAD CAM EDM DRO - Yahoo Group Archive

Re: Building an EDM - switching

on 2003-04-05 10:25:39 UTC
Hi Geir,

I'll clean up my notes over the next few days and send you and Jon
copies.

I am really taking a lot of the stuff from the Langolis book and just
recombining it into what I think is a better combination.

Dave

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Geir Soland" <soland@g...>
wrote:
> Hi Dave
>
> Thanks for your answer - 25 years ago I took my electronics degree
so I
> should be qualified to take a look at your design - but after
almost 20
> years of working with management and almost without any electronics
practice
> both in job and at home in the same period, I have to realize that
my
> qualification is purely theoretical.
> That's one of the reasons why I now have taken up mechanics and
electronics
> as a hobby - I have bought/built myself a fairly complete workshop
for metal
> and wood and I want to combine this with my interest in
electronics. I
> currently building a CNC router/PCB drill. It is a fascinating
project.
>
> It was an article in the Machinist Workshop last autumn about EDM
that got
> to me - The company I working in do have several professional wire
and sink
> EDM's and I have always looked at those machines and accepted the
technology
> to be very complex. I was a bit enlightened (surprised) when I was
> presented for the design of an EDM circuit in Machinist Workshop -
a circuit
> consisting of a rectifier, some capacitors and a couple light bulbs
and
> there it was - a home shop EDM -an amazing and demystifying
experience!
>
> I am very interested in exchanging information regarding your EDM
experience
> and would very much like to look at your designs, both the
electronically
> and mechanical designs.
>
> Regards
>
> Geir Soland
> Norway
>
>
>
>
> > Are you well versed in electronic circuits ?
> > Anybody else on the list well versed and want to review the
> > schematic ?
> >
> > If you don't have the feed mechanism as yet, contact me off list,
I
> > have a great design.
> >
> > Dave
> >

Discussion Thread

Jon Elson 2003-04-04 22:56:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Building an EDM - switching turbulatordude 2003-04-05 06:00:08 UTC Re: Building an EDM - switching turbulatordude 2003-04-05 08:53:26 UTC Re: Building an EDM - switching Geir Soland 2003-04-05 09:57:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Building an EDM - switching turbulatordude 2003-04-05 10:25:39 UTC Re: Building an EDM - switching Earl J. Morris 2003-04-05 18:45:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Building an EDM - switching Rich 2003-04-05 22:02:03 UTC Re: Building an EDM - switching Jon Elson 2003-04-05 22:58:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Building an EDM - switching