CAD CAM EDM DRO - Yahoo Group Archive

Re: Transformer Identity

on 2003-04-09 06:47:39 UTC
I have a tiny 110:24vac transformer

I connect that to the skinny input wires on my unknown transformer
and measure the input voltage and output to get a ratio to see what
the transformer is.

The heavy wires are typically output

Chances are that it is not a 110:46VAC unt that will yield around 65
volts for use with a Gecko.

Dave





--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Brad Eyben" <abeyben@t...>
wrote:
> I'm joining the many in trying to put together a power supply.
> I have a Bridgeport series 1 CNC using the original drivers and an
Ahha
> control.
> I've purchased a rotary table with servo, Gecko320 and a US digital
encoder
> for the servo.
> That leaves me needing a power supply.
> I'm wondering if I can make any use of the transformer from the
Bridgeport
> power supply leftover from my gutting of the cabinet.
> Does anybody know what specs it might be or how to hook it up?
> No labels on this one and it has more wires than I know what to do
with.
> There are 6 terminals with Blue heavy gauge wire (Secondary?) and 3
red, 2
> black, and 1 green lighter gauge wire.
> I've posted a picture here http://makeashorterlink.com/?T20E42424
> I would really appreciate any input.
> Thanks,
> Brad Eyben

Discussion Thread

Brad Eyben 2003-04-09 00:21:14 UTC Transformer Identity turbulatordude 2003-04-09 06:41:12 UTC Re: Transformer Identity turbulatordude 2003-04-09 06:47:39 UTC Re: Transformer Identity Brad Eyben 2003-04-09 12:15:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Transformer Identity JanRwl@A... 2003-04-09 19:39:19 UTC Re: [CAD_CAM_EDM_DRO] Transformer Identity Brad Eyben 2003-04-09 22:55:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Transformer Identity Brad Eyben 2003-04-09 22:58:16 UTC Re: [CAD_CAM_EDM_DRO] Transformer Identity Jon Elson 2003-04-09 23:10:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Transformer Identity turbulatordude 2003-04-10 04:45:24 UTC Re: Transformer Identity - list speed caudlet 2003-04-10 12:27:48 UTC Re: Transformer Identity - list speed Markwayne 2003-04-10 23:24:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Transformer Identity - list speed