CAD CAM EDM DRO - Yahoo Group Archive

Re: Need help.

Posted by echnidna
on 2003-05-08 17:11:39 UTC
Hi Derrick,

If you are just cutting straight lines even a circular saw blade will
work. But if you want to cut irregular shapes a router is probably
the best way to go even though you may need to take several passes.
But lets hope you have started a good subject that gets a few
responses that we can all learn from.

Regards
Bob Thomas

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Derrick" <slick_23_00@y...>
wrote:
> My project goal.
>
> Be able to cut up 1/2" pine, and up to 1/4" plywood.
> Size, about 20" X 48"
>
> This is where it gets fun, i'm not sure where to start. I checked
> out my web sites, and have a good idea of the componets involved. I
> was thinking about using a roto zip, or similiar tool for the
> cutting unit. I have some idea's on the basic mechanics. But not
> sure what i'll need in the line of stepper motor size? What
cutting
> speeds will i be able to atttain? And the big one, cost... I have
> acess to all the tools that would be needed to build a project like
> this, just need some direction.
>
> Any help would be greatly appreciated.

Discussion Thread

Derrick 2003-05-08 14:03:10 UTC Need help. echnidna 2003-05-08 17:11:39 UTC Re: Need help. caudlet 2003-05-08 17:41:57 UTC Re: Need help. Robert Campbell 2003-05-08 20:06:49 UTC Re: [CAD_CAM_EDM_DRO] Need help. Chris 2003-05-08 21:04:27 UTC Re: [CAD_CAM_EDM_DRO] Need help. Ross 2003-05-08 22:51:39 UTC Re: Need help. Chris 2003-05-09 07:27:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Need help.