CNC Lathe Attachment

I have made a CNC attachment for my SB heavy 10.
It is removable and doesn't affect the normal operation of the lathe.
Just bolt on to the ways like a steady rest.
It is constructed from a Hardinge DSC cross slide from a DV 59 second
op. lathe.

I made an adaptor plate to fit the heavy 10 ways, so it can also be
used as-is, for CNC on a hardinge DV-59 or any other Hardinge with
the same way size.

You can also still use it in "manual" mode. I am using size 34
steppers but you can also use 23's or small servos depending on your
needs and what you have lying around.
See photos in the "files" section under "CNC LATHE ATTACHMENT" folder.

Thanks, Joe V.