RE: [CAD_CAM_EDM_DRO] optical encoders
Posted by
John Craddock
on 2003-05-23 17:07:21 UTC
OK Miroslav tell us how.
-----Original Message-----
From: Miroslav Pejic [mailto:peja@...]
Sent: Friday, 23 May 2003 10:08 PM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] optical encoders
I can upload my project - how I made optical encoder system with about
600 ppr, with disc diameter of 50 mm. Increasing the diameter, you can
proportionally increase number of ppr.
This project is easy, with standard components. You only need to
purchase optical disk, (positive film).
If anyone is interested, sign up me.
Peja
-----Original Message-----
From: Miroslav Pejic [mailto:peja@...]
Sent: Friday, 23 May 2003 10:08 PM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] optical encoders
I can upload my project - how I made optical encoder system with about
600 ppr, with disc diameter of 50 mm. Increasing the diameter, you can
proportionally increase number of ppr.
This project is easy, with standard components. You only need to
purchase optical disk, (positive film).
If anyone is interested, sign up me.
Peja
Discussion Thread
george_barr
2003-05-23 03:21:05 UTC
optical encoders
Miroslav Pejic
2003-05-23 05:08:55 UTC
RE: [CAD_CAM_EDM_DRO] optical encoders
Tim Goldstein
2003-05-23 07:58:15 UTC
RE: [CAD_CAM_EDM_DRO] optical encoders
Jon Elson
2003-05-23 10:22:43 UTC
Re: [CAD_CAM_EDM_DRO] optical encoders
george_barr
2003-05-23 15:13:59 UTC
Re: optical encoders
David A. Frantz
2003-05-23 16:16:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: optical encoders
John Craddock
2003-05-23 17:07:21 UTC
RE: [CAD_CAM_EDM_DRO] optical encoders
Miroslav Pejic
2003-05-26 05:18:01 UTC
RE: [CAD_CAM_EDM_DRO] optical encoders
Miroslav Pejic
2003-05-27 05:49:17 UTC
RE: [CAD_CAM_EDM_DRO] optical encoders