CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Conversational CNC Programming

Posted by Mark Thomas
on 2003-06-09 10:23:55 UTC
Peter,

For visualizing what I refer to as conversational programming take a look
at:

http:/home/inter.net/mthomas and follow the link to GenGCode. There are
plenty of screen shots which should give you an idea of what I am referring
to.

Hope this helps

Mark

>
> With controllers frequently used by list, one feed in Gcode/NC
> programs, then activate [start]. Or use MDI to run program block by
> block. This is what I am familiar with.
>
> What I am trying to get is a "video" of someone action on a "real"
> CNC machine with a controller on conversational programming. What
> does he do? Does he, like described above, have an interface where he
> respond to queries and have the "conversational program" generate an
> NC program which he will then have to feed to a controller to run it,
> or does he run it like MDI except it is not blocks like G00 X5, etc.
> Sorry, just hoping to visualise what exactly is conversational
> programming.
>
> Thanks
>
> Peter
>
>
>
>

Discussion Thread

stevenson_engineers 2003-06-08 03:46:29 UTC Conversational CNC Programming wayne_j_hill 2003-06-08 07:41:58 UTC Re: Conversational CNC Programming forumtvm 2003-06-08 14:14:09 UTC Re: Conversational CNC Programming Mark Thomas 2003-06-08 19:06:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversational CNC Programming forumtvm 2003-06-09 09:57:50 UTC Re: Conversational CNC Programming Mark Thomas 2003-06-09 10:23:55 UTC RE: [CAD_CAM_EDM_DRO] Re: Conversational CNC Programming Raymond Heckert 2003-06-10 16:26:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Conversational CNC Programming colin_jet 2003-06-10 16:56:21 UTC Re: Conversational CNC Programming Fred Smith 2003-06-10 18:43:06 UTC Re: Conversational CNC Programming doug98105 2003-06-10 23:27:50 UTC Re: Conversational CNC Programming forumtvm 2003-06-11 08:01:53 UTC Re: Conversational CNC Programming