RE: [CAD_CAM_EDM_DRO] Re: Step & Direction to Phase Driver

Hi Fred,

Some pictures of the modifications I've made to my controller can be found
in the photos section of the taigtools yahoo group. The folder name is
Turbotaig.

http://photos.groups.yahoo.com/group/taigtools/lst?.dir=/TurboTaig+Controlle
r&.src=gr&.order=&.view=t&.done=http%3a//briefcase.yahoo.com/



Cheers,




Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665

> -----Original Message-----
> From: Fred Smith [mailto:imserv@...]
> Sent: Monday, 16 June 2003 1:05 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: Step & Direction to Phase Driver
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Peter Homann"
> <peter.homann@a...> wrote:
> > Hi Fred,
> >
> > The TurboTaig board will work with MaxNC mills, and with others.
> Apart from
> > doing the Step/Dir to Phase conversion, it also processes 4 limit
> or home
> > switches, drives up to 4 relay coils and passes an ESTOP through to
> the
> > computer.
> >
> > The user manual for the board can be found on my web site at;
> >
> > http://people.smartchat.net.au/~homann
>
> Thanks Peter. That was the link I was looking for. We have had
> several requests from people with the older dos/phase technology
> looking for an upgrade path to windows (lot's of Max's and also
> several Taig). DeskCNC has so many CAM functions in addition to the
> basic controller that is is popular with those that want a single
> Windows-PC solution to programming and control.
>
> It looks like it should be fairly easy to put the DeskCNC controller
> in the Taig case, along with your converter board. Any chance you
> have a picture from someone that has accomplished that?
>
> Fred Smith - IMService
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>