RE: [CAD_CAM_EDM_DRO] Step & Direction to Phase Driver

Hi Fred,

The TurboTaig board will work with MaxNC mills, and with others. Apart from
doing the Step/Dir to Phase conversion, it also processes 4 limit or home
switches, drives up to 4 relay coils and passes an ESTOP through to the
computer.

The user manual for the board can be found on my web site at;

http://people.smartchat.net.au/~homann


Cheers,

Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665

> -----Original Message-----
> From: Fred Smith [mailto:imserv@...]
> Sent: Sunday, 15 June 2003 12:16 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Step & Direction to Phase Driver
>
>
> Peter Homan has posted some information on the Taig group that he has
> created a Step & Direction to Phase Driver conversion board for the
> micro-proto system. Does anyone know if this is available as a
> commercial product, or if there are others that might be available?
>
> Next question, does it work with MaxNC or others that use phase
> driver rather than step and direction?
>
> Best Regards, Fred Smith- IMService
>
> Listserve Special discounts and offers are at:
> http://www.imsrv.com/hobby
>
> We are THE source for low cost Cad Cam
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same
> members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>