Re: [CAD_CAM_EDM_DRO] Re: IM483H and IM805H stepper drivers

Hi Jeff -

Sounds like Geckos are a better deal in that case - thanks.

Regards,
Tony

At 16:37 30/06/2003 +0000, you wrote:

>Hi Tony,
> Quite a while back I used the IM483 (not the H series though). If
>I recall corretly, the max voltage and amperage was (as the name
>implies) 48V @ 3 Amps. They worked quite nicely at those voltages
>and amperages. I haven't used a Gecko (so I can't compare
>performance), but the Gecko certainly gives a much wider voltage and
>amperage range(when compared to the IM483).
>
> If you are buying new, Gecko looks to be a much better deal (the
>current 201 price is less than half the cost of the IM805H based on a
>IMS price sheet from Aug/2000 that I have).
>
> The IM483 type device has screw terminals like the Gecko. The
>IM483H type of device has a bunch of pins, which is perhaps a good
>thing if you are building motherboard type of system.
>
>Jeff
>
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Tony Jeffree" <tony@j...>
>wrote:
> > Anyone had any experience of the IM483H and IM805H microstepping
> > drivers? see:
> >
> > http://www.imshome.com/im483h.html
> >
> > How do they compare price- & performance-wise with the G201/G210?
> >
> > Regards,
> > Tony
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Regards,
Tony