Re: Bleeder resistor for power supply size?
Posted by
ben_englund
on 2003-07-07 08:13:01 UTC
Just pick a larger value resistor if you feel you need to put one in
there. I would not use one less than 10kohm(at 1/4 or 1/8 watt).
Just unplug it for a few minutes or so. It does take time to fully
drain the caps, but the voltage falls pretty fast. You should not
need the caps anyway, but I guess I just take a few things for
granted from experience.
Ben Englund
there. I would not use one less than 10kohm(at 1/4 or 1/8 watt).
Just unplug it for a few minutes or so. It does take time to fully
drain the caps, but the voltage falls pretty fast. You should not
need the caps anyway, but I guess I just take a few things for
granted from experience.
Ben Englund
Discussion Thread
John Guenther
2003-07-06 04:27:38 UTC
Bleeder resistor for power supply size?
Jon Elson
2003-07-06 12:41:35 UTC
Re: [CAD_CAM_EDM_DRO] Bleeder resistor for power supply size?
John Guenther
2003-07-06 15:01:25 UTC
RE: [CAD_CAM_EDM_DRO] Bleeder resistor for power supply size?
Tim Goldstein
2003-07-06 15:10:03 UTC
RE: [CAD_CAM_EDM_DRO] Bleeder resistor for power supply size?
stevenson_engineers
2003-07-06 15:56:52 UTC
Re: Bleeder resistor for power supply size?
Tim Goldstein
2003-07-06 16:06:40 UTC
RE: [CAD_CAM_EDM_DRO] Re: Bleeder resistor for power supply size?
wanliker@a...
2003-07-06 17:25:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bleeder resistor for power supply size?
turbulatordude
2003-07-06 18:29:00 UTC
Re: Bleeder resistor for power supply size?
JanRwl@A...
2003-07-06 19:25:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bleeder resistor for power supply size?
Damon
2003-07-06 20:18:40 UTC
Re: Bleeder resistor for power supply size?
turbulatordude
2003-07-06 20:41:51 UTC
Re: Bleeder resistor for power supply size?
Mariss Freimanis
2003-07-06 20:44:43 UTC
Re: Bleeder resistor for power supply size?
turbulatordude
2003-07-07 06:01:02 UTC
Re: Bleeder resistor for power supply size?
ben_englund
2003-07-07 08:13:01 UTC
Re: Bleeder resistor for power supply size?
jchrisj7734
2003-07-08 23:18:12 UTC
Re: Bleeder resistor for power supply size?