CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Parallel port EMC pins

Posted by Karl Klemm
on 2000-03-16 04:51:02 UTC
> from the machine. On the drawing it is shown as pin 25 for
> an IDC type connector, that translates to pin 13 on the 25-pin
> D-type connector. This pin must be low for the machine to
> come out of estop. EMC sends an estop signal out on pin
> 16 (which is pin 6 of the IDC connector).

So EMC senses e-stop through pin 13 of the parallel port, and sends the
e-stop signal through pin 16? Just making sure I get this right.

KArl

Discussion Thread

Jon Anderson 2000-03-09 08:05:12 UTC RFQ, Linux/EMC system Karl Klemm 2000-03-15 17:55:26 UTC [CAD_CAM_EDM_DRO] Parallel port EMC pins Tim Goldstein 2000-03-15 19:54:55 UTC RE: [CAD_CAM_EDM_DRO] Parallel port EMC pins Jon Elson 2000-03-15 22:09:07 UTC Re: [CAD_CAM_EDM_DRO] Parallel port EMC pins Karl Klemm 2000-03-16 04:51:02 UTC Re: [CAD_CAM_EDM_DRO] Parallel port EMC pins