Re: [CAD_CAM_EDM_DRO] Re: Servos, Drivers etc.

Wayne,

These motors are sealed in a TENV (Totally Enclosed Non-Ventilated)
enclosure, it would make no difference. The only cooling is done by
convection of the frame.

Jason.

----- Original Message -----
From: camerashy44 <camerashy44@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, July 18, 2003 11:53 AM
Subject: [CAD_CAM_EDM_DRO] Re: Servos, Drivers etc.


> Running at 80v they will be approx. 1175 RPM. If they do not run at
> full RPM would there be a heating (cooling) problem
> Thanks,
> Wayne
>
>
>
>
> "Jason Cox" wrote:
> > Hello,
> > While gecko's will not run them at their max revs, they will be able to
> > produce their max torque. These are very powerful motors, just take into
> > account the max revs you will get with around 80v when you are
> deciding on
> > your reduction.
> > Its really a matter of how fast you want to go.
> > Rutex do offer a 200v version, but remember the requirements for your
> > powersupply change going to the extra 40v.
> > Just a note, I can supply these motors for US$150ea + shipping,
> which is from Australia so its probably cheaper to buy them on your end.
>
> Jason Cox.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>