Re: [CAD_CAM_EDM_DRO] Re: Question re: about current control schematic

grantfair2001 wrote:

>I did contact the author of the schematic, Suded Emmanuel. He
>confirmed that the base should not go to ground.
>
>However, he states that the emitter and collector are appropriately
>positioned in the diagram, and that the circuit has been tested in
>that configuration and works fine. Well, at least a smoke test has
>speed to recommend itself.
>
>

Well, then, he has the pins on his transistors labeled wrong!
The current just won't flow the way he has it drawn.

Jon