CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Free CAM software beta

Posted by Doug Fortune
on 2003-07-24 21:35:54 UTC
Robert Grzesek wrote:
>
> First let me apologize if the is an in appropriate post for this forum,
> but it seemed relevant.

Yes, very good, we appreciate your efforts and welcome you.

> I spent a little while writing a CAM program, MeshCAM, to generate a
> toolpath from an STL or bitmap file.

> I'd love to hear your input- either positive or negative.
>
> Download MeshCAM at http://www.robgrz.com
>
> Thanks,
> Robert

Something that comes up frequently is people looking for a
'point-cloud' to STL converter.

Point clouds come in two varieties: -evenly sampled (in X & in Y)
and randomly sampled (in X & Y).

You should be able to handle the first case easily (if not,
I can give you some sample code to convert regular sampled
data into STL... there is a neat trick...). Therefore your
program will be immediately useful to people who have a
mill-mounted digitizer....

regards
Doug Fortune
http://www.cncKITS.com










.

Discussion Thread

Robert Grzesek 2003-07-24 21:14:29 UTC Free CAM software beta Doug Fortune 2003-07-24 21:35:54 UTC Re: [CAD_CAM_EDM_DRO] Free CAM software beta robgrzesek 2003-07-25 00:58:31 UTC Re: Free CAM software beta Fred Smith 2003-07-25 06:27:35 UTC Re: Free CAM software beta robgrzesek 2003-07-25 15:55:27 UTC Re: Free CAM software beta vrsculptor 2003-07-25 19:07:49 UTC Re: Free CAM software beta robgrzesek 2003-07-26 00:08:05 UTC Re: Free CAM software beta