Free CAM software beta
Posted by
Robert Grzesek
on 2003-07-24 21:14:29 UTC
First let me apologize if the is an in appropriate post for this forum,
but it seemed relevant.
I spent a little while writing a CAM program, MeshCAM, to generate a
toolpath from an STL or bitmap file. It's currently available in an
unrestricted beta form; no features have been limited and it does not
timeout. I've used it for a little while at work with good success so
now I like to get the input of the forum. If you try it out then I'd
love to hear your input- either positive of negative.
I've set up a yahoo group so that I don't pollute this list with
chatter, http://groups.yahoo.com/group/meshcam/ , or you can email me
directly.
Download MeshCAM at http://www.robgrz.com .
Thanks,
Robert
but it seemed relevant.
I spent a little while writing a CAM program, MeshCAM, to generate a
toolpath from an STL or bitmap file. It's currently available in an
unrestricted beta form; no features have been limited and it does not
timeout. I've used it for a little while at work with good success so
now I like to get the input of the forum. If you try it out then I'd
love to hear your input- either positive of negative.
I've set up a yahoo group so that I don't pollute this list with
chatter, http://groups.yahoo.com/group/meshcam/ , or you can email me
directly.
Download MeshCAM at http://www.robgrz.com .
Thanks,
Robert
Discussion Thread
Robert Grzesek
2003-07-24 21:14:29 UTC
Free CAM software beta
Doug Fortune
2003-07-24 21:35:54 UTC
Re: [CAD_CAM_EDM_DRO] Free CAM software beta
robgrzesek
2003-07-25 00:58:31 UTC
Re: Free CAM software beta
Fred Smith
2003-07-25 06:27:35 UTC
Re: Free CAM software beta
robgrzesek
2003-07-25 15:55:27 UTC
Re: Free CAM software beta
vrsculptor
2003-07-25 19:07:49 UTC
Re: Free CAM software beta
robgrzesek
2003-07-26 00:08:05 UTC
Re: Free CAM software beta