CAD CAM EDM DRO - Yahoo Group Archive

Re: Free CAM software beta

Posted by robgrzesek
on 2003-07-25 15:55:27 UTC
It's been brought to my attention that my web hosting company is
having trouble. If you cannot download the file send I can email it
to you or you can download it from the files section of
http://groups.yahoo.com/group/meshcam/

Sorry fot the problems,
Robert

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Robert Grzesek <robert@r...>
wrote:
> First let me apologize if the is an in appropriate post for this
forum,
> but it seemed relevant.
>
> I spent a little while writing a CAM program, MeshCAM, to generate
a
> toolpath from an STL or bitmap file. It's currently available in
an
> unrestricted beta form; no features have been limited and it does
not
> timeout. I've used it for a little while at work with good success
so
> now I like to get the input of the forum. If you try it out then
I'd
> love to hear your input- either positive of negative.
>
> I've set up a yahoo group so that I don't pollute this list with
> chatter, http://groups.yahoo.com/group/meshcam/ , or you can email
me
> directly.
>
> Download MeshCAM at http://www.robgrz.com .
>
> Thanks,
> Robert

Discussion Thread

Robert Grzesek 2003-07-24 21:14:29 UTC Free CAM software beta Doug Fortune 2003-07-24 21:35:54 UTC Re: [CAD_CAM_EDM_DRO] Free CAM software beta robgrzesek 2003-07-25 00:58:31 UTC Re: Free CAM software beta Fred Smith 2003-07-25 06:27:35 UTC Re: Free CAM software beta robgrzesek 2003-07-25 15:55:27 UTC Re: Free CAM software beta vrsculptor 2003-07-25 19:07:49 UTC Re: Free CAM software beta robgrzesek 2003-07-26 00:08:05 UTC Re: Free CAM software beta