RE: [CAD_CAM_EDM_DRO] CAM generating short lines not G02/G03 curve segments

Doug

Send an email to Anne at Dolphin with your address and she
will send you a 30 day trial Dolphin CAD/CAM package.

Email address for Anne is :- zen26610@...

Regards

Michael

Dolphin Cad Cam Ltd

-----Original Message-----
From: doug@... [mailto:doug@...] On Behalf Of Doug
Fortune
Sent: 25 July 2003 02:23
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] CAM generating short lines not G02/G03 curve
segments


I'm trying to graduate from hand gcoding, some of my projects are pretty

complex (such as the master rod for a 7 cyl 125HP homebuilt radial
engine
I'm working on.. see http://www.hciaviation.com/prod-r220-a.shtml )

See the master rod shape near the bottom of http://www.cnckits.com/

I've generated the DXF file (which has a whole bunch of stress-reducing
curvey but strictly portions-of-circles cuts), but I'm having trouble
locating a CAM package which translates the DXF file into portions-of-
circles cuts (ie G02/G03).

My cnc mill will follow the G02/G03 within 0.000 10 inch but the CAM
programs I've tried (or had my friends try on my DXF) break the circles
down
into linear segments about 5-10 thou long. This just doesn't seem
right! Perhaps I'm looking at the wrong CAM programs!

Does anyone have any suggestions (for a better, but affordable CAM
program?).

I can program it by hand, probably take me a day or two, but I thought
this would be a good opportunity to settle on a particular CAM
program. So far though, no luck.

I know of an aftermarket software package called MetaCut Finish. It
will
take the already-generated-with-short-lines gcode, analyze that, and
output G02/G03 circular segments http://www.metacut.com/ but that is
an extra step and extra cost I'd like to avoid.

regards
Doug Fortune
http://www.cncKITS.com

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/