Re: Ametek 600oz/in 965922 motor encoder??

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "etauch" <erictauch@a...>
wrote:

> Greetings,
>
> I recently ordered some Ametek servo motors. These are the
> green 600oz/in variety. They are models:
>
> 965922-101 (1 5/16 shaft)
>
> 965922-102 ( 1 7/8 shaft)
>
> Both motors have a 3/16 diameter by 3/8 long encoder mounting
> shaft. I purchased then at www.candhsales.com, stock number
> DCM9951 and DCM9951A.
>
> If anyone has these motors, I would appreciate a part number
> and source for the encoders you are using. I am looking to
> get the encoders at www.usdigital.com.
>
> Thanks,
>
> Eric

I have those motors, I just checked the inscribtion on
the encoders it reads US Digital E2-250-197
they are U-shaped about 1.18 wide 1.4 long and 0.6 thick
I don't have the Partno. but maybe this will help.
Good Luck