RE: [CAD_CAM_EDM_DRO] ElectroCraft Servos

Thanks Jon,
The part number for the E543 is 0543-01-005.
The part number for the reliance E240 is 240-026-0888
HTH
Kind regards
John C


-----Original Message-----
From: Jon Elson [mailto:elson@...]
Sent: Tuesday, 29 July 2003 3:09 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] ElectroCraft Servos




With ElectroCraft, the whole part number is important. The main model
number just defines the frame the motor is built on. I don't have the
E-543 in my book, but I do have the E-542. There are 4 versions,
denominated -01 through -04. The torque constant and voltage
constant are different for all of these motors.

I did find some info on a goldmine web page :
http://www.goldmine-elec.com/pdf/241page11.pdf
but these are not very useful measurements.

Jon


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/